BASIC TOOL SET

Description of Tool or Set

Punch and chisel set

Combination wrench set.  12 pt.  10mm to 19mm

8mm Combination wrench  6 pt.

24 oz.  Ball peen dead blow hammer.

32 oz.  Plastic coated dead blow hammer.

Screw driver set.  (Orange Handles - 8 pieces)

3/8" drive shallow and deep socket set.  8mm to 19mm  6 pt.

3/8" drive extension and adapter set.  (includes three lengths:

       1 1/2", 3", 6"extensions, and two adapters 

3/8" drive ratchet. (Standard length)

3/8" drive ratchet. (Flex head, long handle)

6" metal machinist rule.  US and Metric

Spark plug gapper

24" pry bar with handle.

Pick Set 4 piece with handles (Orange colored handles.)

Plier set.  (Cutters, needle nose, slip joint.)

Adjustable Joint Plier

ELECTRICAL SUPPLEMENT SET

Description of Tool or Set

1/4" drive plastic box 

1/4" drive long shank driver w/female square dr

1/4" drive sealed ratchet 

1/4" drive 2" knurled extension

1/4" drive 4" knurled extension 

1/4" drive 6" knurled extension

1/4" drive universal joint

1/4" drive 7mm metric 6 point short socket 

1/4" drive 8mm metric 6 point short socket 

1/4" drive 9mm metric 6 point short socket 

1/4" drive 10mm metric 6 point short socket 

1/4" drive 11mm metric 6 point short socket 

1/4" drive 12mm metric 6 point short socket 

1/4" drive 13mm metric 6 point short socket 

1/4" drive 14mm metric 6 point short socket 

Socket rail  (length 7 3/8" to fit inside PB24)

1/4" drive socket rail clips (9 minimum for the above rail)

12v test light

Remote starter switch

Battery brush

Battery tester - thexton

ENGINES AND TRANSMISSIONS SUPPLEMENT SET

Description of Tool or Set

Folding hex wrench set.  (.050" to 3/16") 

Metric folding hex wrench set.  (1.5mm to 6mm) 

Blow gun. (non-restrictive) rubber tip.

Bronze tip hammer.  24 oz.

Plastic faced gasket scrapper. 

Tapered bronze punch.  10" long, 3/8" tip diameter.

3/8" drive spark plug socket. 13/16"

3/8" drive spark plug socket  5/8"

Feeler gauge set.  .0015" to .035".  35 blades.

TRANSMISSIONS SUPPLEMENT SET

Description of Tool or Set

Snap ring pliers.  3/32" Wide straight tips and 1/16" thick.

Snap ring pliers.  3/32" Thick ends with 1/8" dimple.

Convertible snap ring pliers.  .070" tips

Convertible snap ring pliers.  .047" tips

3/8" drive extension.  10 or 11" long.

ENGINE PERFORMANCE SUPPLEMENT SET

Description of Tool or Set

Mighty Mite vacuum pump

Spark plug gapper - conventional

Spark plug gapper - electronic

Modified spark plug - Kent Moore

Injector test noid - Kent Moore

Compression gauge set

Vacuum & fuel pump for carburetor pressure gauge set

High pressure injection fuel pressure gauge Set

BRAKE AND CHASSIS SUPPLEMENT SET

Description of Tool or Set

3/8" drive disc brake caliper set   (Includes hex sizes:

Flarenut wrench 6 piece set - Metric (Includes sizes:  9-11mm,

Flip socket set (19-21mm, 3/4-13/16", & 3" extention)

Pinch bar  38"

1/2" breaker bar

Combination wrench 12pt. 20mm

Combination wrench 12pt. 21mm

Combination wrench 12pt. 22mm

Combination wrench 12pt. 23mm

Combination wrench 12pt. 24mm

40 oz. dead-blow ball peen hammer

Hub cap remover / installer

1/2" Dr. Flex-head torque wrench 40-250lb.ft.

1/2" Dr. super duty air impact gun

1/2" Dr. impact socket set 6 pt. (3/8"-1")  11 pcs.

Flairnut wrench set (1/4 " to 13/16) 5 pcs.

Tire gauge 20-100 psi

Tire valve stem tool

Tire tread depth gauge

Air chuck

Brake service tool set  (includes: spring pliers,